Видео

Please save and share the clip of how to make the wire collector، what parts have been done during construction؟ Is it suitable for cable size 2*4 with a length of 300 meters or by using drills، pulleys and gears that can turn the pulley؟

Total pretenders!!! I bought their system and would never do it again!!! Junk!

Total pretenders!! Bought their system and would NEVER DO IT AGAIN!

Total pretenders!! Bought their systems would never do it again!!!!

I need a 1/2 in. body variant.

What type of thread sealant are you using in this video for your QR? It almost looks like gorilla glue

What would u need to run 1/2 and 3/8 lines off one air compressor without stealing air flow from 1/2

Can you show how to put it in and take it out again I didn't get it

They need to include this straightener with the kit because if you install the kit without the straightener it looks like shit. Another thing they are cheaping out on us with the straightener because it shows in the video it having aluminum rollers and when it arrives it has CHEAP PLASTIC ws on it. 😡

I can not understand why the gauge is so tiny, I bought one at summit racing. After seeing it in person,I am going to return it.

We buy RapidAir Products....cool to hear the story Andy! Now I'm going to buy some more monitors so I have 4 like y'all. Haha. So frustrating when you don't have enough screen space with a bunch of pages open (QuickBooks, PDFs, Outlook, Excel, etc.)

This guy is an idiot he should stay away from tires

Not sure why you call it fast pipe

You show a 90° bend on what sounds like the aluminum tubing, which's also mentioned in the description, yet the instructions say "to a maximum of 15° DO NOT OVERBEND" I wanted to do two 45°s, yet don't want to ruin the pipe...so which is correct!?

Dude, while I am very happy that you addressed the siphon question, what really impressed me was your mad drone skills getting through the trees down to the creek! WOW! Also, 2 other things: My experience has been that anything metal left out for an entire season is almost always seized up and corroded together when it comes time to disassemble it. I grew up hating "cheap plastic parts", but over the decades, plastic has become my best friend. True, some things have to be metal, but I now avoid it unless there is no other choice. Next, I don't know if you caught it in my comments in the previous video, but the ram pump can be used to automatically prime and reprime the siphon, by installing a one way flow valve in parallel with the entire ram pump assembly. And while we're at it, a toilet bowl or stock tank type of float could be used to throttle the siphon to make sure it never overflows the pond. Or, a simple valve could be used (much more reliable).

What about running in walls under sheet rock?

whats the name of the compound you applied after the tape?

shame about the annoying electric guitar music

Dont you lose PSI for every drop leg?

I had a seal give out on this unit within a couple of months. I replaced the seal and it's good to go now. The only thing that I don't like about this unit is the gauge is too small to see from a short distance. If it wasn't for that I would buy one. The first one I got was given to me.

Looks like a great product but for the money I shouldn't have to be bending pipe straight and how long will that PLASTIC pipe hold up for. I like the hard aluminum pipe better, just my opinion. Maybe if the price was a little lower I would jump on it.

What a load of garbage in marking the fittings with a sharpie when all one has to do is tighten !!

That was my old shop , when I moved to new shop on 2019 I was able to use all the pipe and fittings again , and had to order a few lengths of pipe and some fitting since new shop is 2800 sq ft larger.

Discontinued product.

One of these kits arrived missing a connector. Do I contact you or Amazon for the missing piece?

I have two of these kits, they work pretty well but I do have a bit of leakage where the PEX seats. Not a lot, but a little.

He never let the unit run to the programmed pressure to show how it turns off. It can't turn the compressor off so does it just shut a valve to prevent more air from passing?

Ordered a bunch of these yesterday.

You claim that Rapid Air designed this product which is false! The original design was done by Jamec Pem !!1

Looking for something like this but this unit is $200. My small cigarette lighter air compressor can shut off at required pressure. Wanted air compressor tool so it would do it quicker but wow, $200 is too steep.

Bullshit, the corect presure is shown in the manual and not on the tire or on the b-pillar of each car.. do not fall for the crap this idiot puts out. The manufacturer of the vehicle will give you the correct tire pressur..OH usa...

jackass....don't fill it to the sidewall pressure, thats the max the tire can handle

hi. is it crimping pipe pressing joints from 110 to 168mm?

Amusing how manufacturers seem to overlook all the difficulties built into their systems and show the installation as 1 2 3. In this case the coil line at 3/4" inch is extremely extremely difficult to straighten (to which they want to sell you a one time use $158 tool!!) and the fittings are a challenge to assemble to the pipe even with lubricant (I used conduit lube) requiring more force than hand gripping the pipe will provide to push the pipe into the fitting. I do observe that they have come out with straight pipe sections later to address the piping problem. These do not distort the pipe id like the coil line does (and yes I used the 'tool' to debur and dimension the id). The fittings are extraordinarily expensive as well. The kits do not include enough drops for 100' of run in a normal shop so you have to buy quite a few more fittings more than doubling the price of the 'Kit'. This would seem a ripe opportunity for competitors. The tubing looks like the same Pex makes for heated floor runs with the aluminum lining. It is not a standard size though so I am assuming it is metric. Buying the standard size Pex heat pipe and using generic shark bite fittings will bring the cost down considerably.

Instalation k liye agar koi hai to plz call me 09021387403.. Installation site in ranjangaone MIDC. (PUNE CITY)

can you tell me why its so hard to adjust preasure? I dont want to break it

What is the 3D Drawing tool?

This shows a tool that appears to have aluminum wheels. The web site shows a tool with black wheels that look like they are plastic and Amazon has several reviews that mention plastic and broken wheels. Has the tool been cheapened since this video was made?

That was 2 minutes wasted.

What size pipe is this?

I don't think this guy knows what he's talking about why would he check the vehicle spec on a tire . Jesus Christ 😂

Anywhere you can rent this tool?

What size Adjustable Wrench did you use? 12", 15"?

Why use 1/4 quick connect on the output, when the tubing is 1/2 Id? Wont this restrict the airflow?

How do you install the parts on the bottom of the bowl

Will this deflate tires as well, I am a agriculture mechanic, tractors ship to use at 40psi, but need to be drained to 12psi will this work backwards as well?

$140 for a one time use tool is a bad joke! Give me a DIY method or show me how to build this tool from hardware store stuff!

Okay so WHERE do I buy this straightener ? I installed the 3/4 system in my shop and HATE, HATE , HATE the look ! I have been considering replacing it with 3/4” copper pipe !

no installing as title states? should have been "commercial for compressed air line system" please update

*I got the set without the accessories because I'm picky. >>>>**ur2.pl/1018** Follow the break in instructions like the other reviews say. Run for 15 minutes while the release valve is open. Good construction overall. comes with two quick connects. I ended taking one of them off and putting a recoil hose on it. One less point of failure.*